SIHI VACUUM/COMPRESSOR TECHNOLOGY

Browse more categories

liq-ring-pumps_button
Liquid Ring Pumps
compressor_button
Liquid Ring Compressors

SIHI is one of the world leaders in liquid ring vacuum pump and liquid ring compressor technology. Supplying a wide range of vacuum pumps and compressors for many industries and applications, providing reliable, trouble free operation.

Vacuum/Compressor Technology
SIHI Liquid Ring Vacuum Pumps (LPH LEH & LEM):

The below illustration is of a typical SIHI two-stage Liquid Ring Vacuum Pump. The principal components are the suction and discharge covers, the intermediate port plates, the impellers, shaft and bearing supports. Built up in sections which are held together by longitudinal tie bolts passing from cover to cover, many parts are common to two or more Liquid Ring Vacuum Pumps. By utilizing various combinations of impeller sizes, staging and direction of gas travel, it is possible to produce models of varying capacities from the same basic components.The Liquid Ring Principle of Operation for a single acting Liquid Ring Vacuum Pump can be found in our Education Section.

sihi-pumps-main

Liquid Ring Vacuum Pumps are equipped normally with two or more external bearings. Stainless steel shafts of rugged design further add to over-all durability, and reliability. Liquid Ring Vacuum Pumps are capable of 25 Torr (1″ Hg Abs) with 60°F water. Pressures of 12 Torr. and less, are possible with low vapor pressure fluids. SIHI atmospheric air ejectors can decrease this to about 3 Torr. or auxiliary equipment, such as rotary lobe blowers and steam jets can extend this range 1 Torr or less.

Compressor discharge pressures from atmospheric to approximately 25 PSIG are attained with single acting pumps. Higher pressure requires the use of double acting multi-stage compressors. The figure below illustrates the present capacity range.The Liquid Ring Principle of Operation for a double acting Vacuum Compressor can be found in our Education Section.